- Personalized Engine Monitoring
Product Description05-07 6. 0L Ford Powerstroke
Quadzilla Adrenaline with iQuad – Ford Powerstroke
Archive for the ‘13’ Category
Quadzilla Adrenaline with iQuad – Ford Powerstroke
Sunday, May 8th, 2011
S&B Cold Air Intake 1994-97 F250/F350 V8-7.3L Powerstroke 75-5027
Friday, May 6th, 2011
- Increases HP and TQ
- Improves Fuel Economy
- Guaranteed Engine Protection
- Improves Air Flow
- Custom Air Box for cool less dense air
Product DescriptionS&B Performance Intake Kits are engineered to maximize the amount of airflow to the engine. Exceptional design coupled with advanced research and development, allow S&B to get the power increases you demand and the protection you crave. And as with all of S&B Filters products, they are tested to the ISO 5011 Standard. S&B Performance Intake Kits Feature:Washable, re-useable filter manufactured with four or eight layers of premium cotton gauze to maximize airflow and filtration. Custom high performance air box, isolates the filter from engine heat, drawing in cooler outside air to boost engine performance. Exceptional design streamlines airflow, allowing the engine to ingest more air, increasing horsepower. Simple to install CARB exempt. Each kit S&B produces is manufactured to the highest standards and submitted for CARB exemption*(*in some cases, because of engineering innovations that are brand-new, approval is still pending) – Made in the USA Better Air Flow = More Horsepower S&B’s intake kits are engineered to improve the airflow to your car’s engine. It starts with years of research and development, as well as the most technologically advanced testing. S&B tests to the ISO 5011 Air Filtration Standard in a climate-controlled lab when designing and testing their intake kits. This is the same technology used by Ford, Chrysler, and General Motors to design the original induction system that comes on your vehicle. Thorough Research and Development Back It Up – Certified Test Results S&B provides ISO 5011 Certified Test Results for it’s intake kits, so you can see exactly how much the airflow was improved as well as the efficiency of the filter.
S&B Cold Air Intake 1994-97 F250/F350 V8-7.3L Powerstroke 75-5027
Airaid 860-341 Direct Replacement Premium Air Filter
Thursday, May 5th, 2011
- Designed to replace the original equipment filter; will not void vehicle warranties
- Five layers of filtering media keep harmful contaminants out of the combustion chamber
- Easy “do it yourself” installation
- Backed by a “no hassle” lifetime warranty
Product DescriptionThe Airaid Direct Fit Replacement Air Filters are tested to SAE standards and can capture 99. 997 percent of particles of 10 microns and larger size. The combination of 304 stainless steel and five layer media enhances the durability of these filters. Durable media and premium urethane body facilitates superior filtration. These filters contain multiple cotton gauze layers, a SynthaFlow layer that is the final layer of defense assuring the cleanest air possible from any washable filter, and durable epoxy-coated wire mesh specially designed to provide optimum balance between maximum air flow and peak filtration.
Airaid 860-341 Direct Replacement Premium Air Filter
Bully Dog 41617 4 Bank 6 Pre-Programmed Position Chip with Flip Switch
Wednesday, May 4th, 2011
- Increases horsepower and torque
- Tranny smart programming to reduce sluggish shifts
- Increases fuel economy
- Removes speed limiter
- Six on-the-fly adjustable power settings
Product DescriptionThe 6 Position 4 bank Chip is designed to increase horsepower and torque on a manual transmissions. The six positions included are: High Idle, Valet, Stock, +50 horsepower, +75 horsepower, +125 horsepower. Utilizing state-of-the-art programs, Bully Dog’s 6 Position 4 Bank Chips run the lowest exhaust gas temperatures in the industry, typically running 50 to 100 degrees cooler than competitor products. These performance modules are designed to increase horsepower while keeping EGT’s under control. The new 6 position 4 Bank chip gives additional options such as: high idle with increased RPM for cold weather starts. Valet setting which returns the truck to stock and adds a 70 mph speed governor. Save time with the ease of operation by adjusting on the fly.
Bully Dog 41617 4 Bank 6 Pre-Programmed Position Chip with Flip Switch
BD Diesel Performance 1032175 Crank Case Vent Filter Kit
Friday, April 29th, 2011Product DescriptionBDâ?TMs new Crank Case Vent Filter Kit for Ford 6. 0 and 7. 3-liter Power Stroke applications reduces crankcase oil vapor that passes through the crankcase vent and contaminates the intake system. Oil Vapor residue reduces turbocharger and intercooler efficiency, and also deteriorates the silicone bootsâ?”causing them to balloon and blow off. BDâ?TMs Crank Case Vent Filter Kit prevents all of these issues, and includes everything you need for a professional installation, including all hardware and clamps. Installation time takes just two hoursâ?”call and order yours today!
BD Diesel Performance 1032175 Crank Case Vent Filter Kit
Edge 13000 7.3L Juice Powerstroke Attitude Monitor
Tuesday, April 26th, 2011
- FORD SD PLR MNT KIT 99-02
Product DescriptionAttitude In-Cab Controller Completely Replaces Gauges Provides Safety Features Pillar Mount
Edge 13000 7.3L Juice Powerstroke Attitude Monitor
aFe 46-10061 Bladerunner Manifolds Intake
Monday, April 25th, 2011
- High flow for increased performance
- Cast A356-T6 aluminum
- Increase in HP and torque with lower EGT’s
- Increased mileage
- Faster turbo spool up
Product DescriptionThe new Bladerunner manifold kit for the popular 7. 3L Power Stroke is constructed of cast A356-T6 aluminum and features the patented MDV (multiple directional vane) technology which helps increase intake velocity for increased flow, lower EGT’s, improved MPG and faster turbo spool up times. This system contains one Bladerunner intake manifold which outflows the factory unit by 18 percent and one Bladerunner turbo outlet manifold that outflows the factory unit by 15 percent. This is a direct bolt-on system with all hardware and brackets requires for an easy installation. These manifolds also come with 1/8 inch NPT ports for nitrous, gauges or testing probes.
aFe 46-10061 Bladerunner Manifolds Intake
FASS High Performance Fuel Pump – Ford Powerstroke
Friday, April 22nd, 2011
- Better Materials for Better Performance^Allows You To Tweak Fuel Pressure on the “Fly”
Jonathan’s H&S Hot Damn Tune’d 6.4
Thursday, April 21st, 2011
This video was uploaded from an Android phone.
Six-Gun Diesel Tuner for Ford 6.4L Power Stroke from Banks Power ID7303
Monday, April 18th, 2011
SEMA SHOW 2009 NEW PERFORMANCE-STREET PRODUCT: Six-Gun gives you the power to switch between six power levels on-the-fly for a whopping 95hp/+180 lb-ft gain. EconoMind® level and features deliver an up to 10% increase in mpg.