@Kahlo69 A? clutch that uses two clutch discs. The factory Dodge clutch only uses one clutch disc. Using a second disc gives more than twice the holding power, while keeping some street manners. . .
Yah, that’s a 95gph FASS. It has too many? mods to list in the video. I just put the ones that really mattered to me. it has a aftermarket exhaust manifold, lower compression pistons, a thicker headgasket, headstuds and a ECM the MADs modified for me back in ‘03 or so. It’s just a 3500 2wd. I think the bed being so fat makes it look skinny. Just a regular CM Flatbed, 8′x8′. I bought LED lights all around for the bed, blacked them out and got rid of the reverse lights.
yeah 2 of my friends have SB clutches in there civics (one ran 12. 9 with a stock H22 on slicks and spray) and they did a? custom setup for a dodge shadow with a twin turbo 3000GT motor that we built. AWESOME JOB GUYS!!!!
It’s holding up Great! Been running it since mid ‘07 at 500HP +/- 5? HP depending on dyno, and I tow a 19k trailer daily. Also, it only costs like $900 or so to get it rebuilt. . .
I haven’t been to the track with it since I’ve put the new motor and clutch in it. Ran a 14. 3 @ 106MPH before the better clutch and low compression motor. That was also before the flatbed, so, I’m not sure how much that affected? me.
whats your quarter mile time? just curious about what transmission? i want to go with. amazing truck.
rwhp?? and whats your setup? what twins, injector, cam, headwork, ext. . ?
@purpleflavoredcherry ok? thats what I thought
@Kahlo69 A? clutch that uses two clutch discs. The factory Dodge clutch only uses one clutch disc. Using a second disc gives more than twice the holding power, while keeping some street manners. . .
whats a? dual DISK clutch?
@purpleflavoredcherry Thank you for a positive you tube response. We need more like you that don’t say f-off a the drop of a? hat.
@f44life 3250?
what pressure?? 3250? 3600?
love? the black smoke
Yah, that’s a 95gph FASS. It has too many? mods to list in the video. I just put the ones that really mattered to me. it has a aftermarket exhaust manifold, lower compression pistons, a thicker headgasket, headstuds and a ECM the MADs modified for me back in ‘03 or so. It’s just a 3500 2wd. I think the bed being so fat makes it look skinny. Just a regular CM Flatbed, 8′x8′. I bought LED lights all around for the bed, blacked them out and got rid of the reverse lights.
If your gonna list the mods list them all man its also got the fass lift pump/w filters, under the bed
Did you convert it to a dually or was it? a chassi cab when you bought it cause it looks pretty narrow for a dually?
yeah 2 of my friends have SB clutches in there civics (one ran 12. 9 with a stock H22 on slicks and spray) and they did a? custom setup for a dodge shadow with a twin turbo 3000GT motor that we built. AWESOME JOB GUYS!!!!
I’m still running the? same clutch, and it’s still putting up with my abuse. . . . South Bend gets my Thumbs up!
south bend clutch? does a great job.
It’s holding up Great! Been running it since mid ‘07 at 500HP +/- 5? HP depending on dyno, and I tow a 19k trailer daily. Also, it only costs like $900 or so to get it rebuilt. . .
how does the clutch hold up? Iam in the field for looking at clutches and heard that SBC’s DD? set up is the way to go, any advise?
congrats, at your annoy a liberal day celebration. that? smoke takes my allergies away
Now thats? a real working truck that can kick butt!!!!
I haven’t been to the track with it since I’ve put the new motor and clutch in it. Ran a 14. 3 @ 106MPH before the better clutch and low compression motor. That was also before the flatbed, so, I’m not sure how much that affected? me.
Which? gear gives your the lowest ET?
lol ok you got me there?
yeah sure but most ppl like to have? nice work trucks. DUH!
It’s? a nv5600
is this a? nv5600 or 4500?
dude not every body buys trucks to lift and make all shiny some people actually use there trucks for “work”. you might not? know that word.