INSTALLING A RAYCOR INLINE MARINE GRADE FUEL FILTER / WATER BLOCK IS A HUGE STEP TOWARDS KEEPING YOUR INJECTORS SAFE FOR THE LONG HAUL.
Tags: IMMORTALITY, Injector, Powerstroke
INSTALLING A RAYCOR INLINE MARINE GRADE FUEL FILTER / WATER BLOCK IS A HUGE STEP TOWARDS KEEPING YOUR INJECTORS SAFE FOR THE LONG HAUL.
Tags: IMMORTALITY, Injector, Powerstroke
Some good info to have: I recently found that Donaldson canister filters with 1″-14 threads will fit the Racor housings design for R-series filters.
I have a Racor 645 housing with a Donaldson P553203 filter on it. The? P553203 is 8″ tall drainable FF/WS rated at 3 micron absolute.
Knowing this interchange could be valuable out on the road.
Ok. . . I will. ?
He walked off. . . . ? LIKE A BOSS!!!
@powerstrokehelp Yeah I? figured that. But what I don’t understand is why the fuel pump won’t pull fuel through the new lines and filter? Should I get a Racor with a priming pump?
@spencnaz Probably got air in the system. ?
I just plumbed mine in using Parker rubber lines to the? fuel pump. Truck starved of fuel and died. Should I have filled the Racor with fuel first and then started the truck?
Thanks Bill !
I plan on using this system with the 2 micron filter. I don’t EVER want to go through the pain again of new injectors. Ford quoted me $4000 + to do a full set ! However, I plan? on having Elite Diesel Engineering do mine because they are much less.
@txgp17 5/16? should be ok with moderate or stock tuning.
@powerstrokehelp Bill, after watching this, I got a Racor filter of eBay with some 2 micron elements. On my 02, I inserted a brass barb in the rubber line connecting the metal line to the pump, ran it to the filter and back . This barb was 5/16″ if I recall. Do you think this smaller barb will restrict flow too much?
I’m concerning about starving my injectors. I’ll be putting in new ones in #2,3, & 8 over the weekend.
Thanx so much for your videos. ? They’re a BIGG HELP.
@louie9456 The? line that goes to the fuel pump. The pump needs to draw through the filter.
@Lasselkv28 10 micron?
which line do you connect the filter to top or bottom line on a 6. 0 Thanks? great video on raycor
Which fuel line do i use to connect the raycor fuel filter. My 6. 0 has two lines? going to the pump on the fram rail is it the top line or the bottom line. Thanks great help
Do you use the 10 micron? or the 30 micron filter? Looks like a R90 element.
Outstanding, thanks!?
Racor, Separ and Stanadyne? filters are used everywhere today.
@spencnaz I think you install it between the tank and the pump. ?
Bill, thanks for the advice,? but do you think this is required for the 6. 4L considering it already has a fuel/water separator and two fuel filters on it? I guess it doesn’t hurt to have a redundant system, considering how sensitive the injectors are, but you don’t mention the 6. 4L in the video, only in the title. Thanks for the insight.
Hello, I have a 97 7. 3 and I wanted to know? what saginaw pump model
you mentioned in your video that would fit 7. 3? Also is there any mounting brackets I would need to install it?
Thank you, your videos are the best by a long shot!!!!!!!!!
Do I install the? Racor between the fuel pump and the engine? I have a 2001 Powerstroke. Thanks.
Do you need to get a different model for the 6. 0l? since there is 2 lines coming into the pump that is mounted on the rail below the drivers side door?
thanks for including all the part numbers!? looks like a very worthwhile upgrade. BTW the Racor 320R-RAC-01 filter is available from Amazon for 73. 00
It should not put any more strain as long? as the filters are kept clean.
Will this put additional strain on? the lift or injector pump?
Great video, as? usual!