Sally. 01 f350 – 7.3 Powerstroke Starting problems

7.3 pstroke starting problems

Tags: F350, Powerstroke, problems, Sally, starting

5 Responses to “Sally. 01 f350 – 7.3 Powerstroke Starting problems”

1. thebluesmancjd says:

   December 29, 2011 at 8:24 pm

   Shoot a little ether in there. She’ll either start or she won’t. In all seriousness, I would? find some way to monitor the ICP pressure. You need around 500 psi to get a 7. 3 to start. If you have low pressure, the by-pass plug on your oil filter mount might be missing, causing the oil to drain back into the oil pan. I had the same problem with my ‘97. Also check alternator voltage.
   Good Luck!
2. thebluesmancjd says:

   December 29, 2011 at 9:09 pm

   Shoot a little ether in there. She’ll either start or she won’t. In all seriousness, I would find some way to monitor the ICP pressure. You need around 500 psi to get a 7. 3 to start. If you have low pressure, the by-pass plug on your oil filter mount might be missing, causing the oil to drain back? into the oil pan. I had the same problem with my ‘97.
   Good Luck!
3. tfarms08 says:

   December 29, 2011 at 9:32 pm

   @Shithappens109 anytime man if it aint that check the voltage in your batterys they could be? low and causing everything to go waackoo lol
4. Shithappens109 says:

   December 29, 2011 at 9:59 pm

   @tfarms08 Cool man thanks a lot that sounds? about right! ill check it out
5. tfarms08 says:

   December 29, 2011 at 10:54 pm

   im from the org it sounds like a relay goin nuts? kinda was it blowing any smoke when you were trying to crank it any? Check fuse number 30 i belive thats the number anyway